| | | | | | | | | | | | | | | abl2 series applications: features: pb rohs compliant iso 9001 / qs 9000 certified iso 9001 / qs 9000 certified standard specifications: abracon is abracon is 30332 esperanza, rancho santa margarita, california 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com revised: 09.01.10 visit www.abracon.com for terms & conditions of sale 11.5 x 5.0 x 2.5 mm ? high reliability & low cost ? reduced height at 2.5mm ? tight stability & extended temperature ? proven resistance welded metal package ? home electronics ? computers, modems, and communications ? automotive and industrial ? high-precision tcxo and clock applications ? microprocessors frequency tolerance at +25c frequency stability over the operating temp. (ref to +25c) parameters 3.579545 mhz to 70 mhz 50 ppm max. (see options) frequency operation mode operating temperature storage temperature - 55c to + 125c 0c to + 70c (see options) 50 ppm max. (see options) equivalent series resistance (r1) shunt capacitance c 0 load capacitance c l drive level aging at 25c per year insulation resistance see table 1 18pf (see options) 1 mw max., 100w typical 500 m min at 100vdc 15v 7pf max. 5ppm max. hc / 49us (at49) microprocessor crystal ? at cut (fundamental or 3rd ot) or bt cut (see options) 3.579545mhz - 24.0mhz (fundamental) (standard) 24.01 - 70.00mhz (3rd- overtone) (standard) 24.01mhz - 50.00mhz (fund. at or bt) (see options) drive level dependency (dld): minimum 7 points tested: from 1w to 500w. change in frequency (max - min) over dld range < 10ppm. change in esr (max - min) over dld range < 25% of max esr value. maximum esr over dld range < max esr value. table 1: esr esr ( ? ) 3.579 - 4.999 (fund.) 180 5.000 - 5.999 (fund.) 120 6.000 - 7.999 (fund.) 100 8.000 - 8.999 (fund.) 80 9.000 - 9.999 (fund.) 60 10.000 - 15.999 (fund.) 50 16.000 - 50.000 (fund.) 40 24.01 - 31.999 (3rd o/t) 100 32.000 - 70.00 (3rd o/t) 80 frequency (mhz)
| | | | | | | | | | | | | | | abl2 series pb rohs compliant iso 9001 / qs 9000 certified iso 9001 / qs 9000 certified abracon is abracon is 30332 esperanza, rancho santa margarita, california 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com revised: 09.01.10 visit www.abracon.com for terms & conditions of sale 11.5 x 5.0 x 2.5 mm hc / 49us (at49) microprocessor crystal options and part identification (left blank if standard) a -10c to +60c t tape & reel b -20c to +70c p foam c -30c to +70c tray tray n -30c to +85c d -40c to +85c j* -40c to+ 105c k* -40c to +125c l* -55c to +125c i insulator tab v vinyl sleeve h5 5 ppm l2 middle 3rd lead 1 10 ppm qxx trimmed leads 7 15 ppm q15 for 0.15" length 2 20 ppm 3 25 ppm 4 30 ppm f fund. at>24mhz fb fund bt>24mhz u** 10 ppm note: fundamental bt frequency stability g 15 ppm 100ppm max.at -10 c to +60 c only. x 20 ppm w 25 ppm y 30 ppm h 35 ppm q 100 ppm r 150 ppm * frequency stability 50ppm, 100ppm, 150ppm only. contact abracon for tighter frequency stability. ** -10 to +60c only. mode rxxx (value in ? ) operating temp. packaging value added xx.xxxx mhz esr please specify cl in pf or s for series (minimun 10pf) abl2- frequency - - r - - - - - - frequency load capacitance freq. tolerance freq. stability
|||||||||||||| | abl2 series pb rohs compliant iso 9001 / qs 9000 cer tified iso 9001 / qs 9000 cer tified abracon is abracon is 3033 2 e s p e ranza , ra n c ho sant a mar g ari ta , califo r n ia 9268 8 t e l 949- 546- 8000 | f ax 949- 546- 800 1 | w w w . abrac on. c o m revised: 09.01.10 visit www.abracon.com for terms & conditions of sale 11. 5 x 5 . 0 x 2 . 5 m m h c / 4 9us ( at4 9) m i c r o p roce ssor cr ystal dimensions: mm tape & reel: t = tape and reel 1,000pcs/reel outline drawing: dimensions: inches (mm) 12.7 1.0 12.7 1.0 1 8 . 5 0 . 5 2 2 . 5 max 1 2 . 7 1 . 0 9 . 0 0 . 5 1 8 . 0 + 0 . 1 -0 . 5 4.0 0.2 with 0.3mm insulating pad attention: abracon corporation?s products are cots ? commercial-off-the-shelf products; suitable for commercial, industrial and, where designated, automotive applications. abracon?s products are not specifically designed for military, aviation, aerospace, life-dependant medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. for applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from abracon corporation is required. please contact abracon corporation for more information.
|